The classic Noma Victorian Lanterns set (4611) has 40 lantern-shaped shades lit by Noma G1 push-in bulbs. Noma no longer makes the set, but we stock genuine G1 spares to keep yours working, posted the same day.
Your Victorian Lanterns 4611 takes Noma G1 bulbs
39 × G1 6V 0.75W push-in bulbs + 1 × G1 fuse bulb 5V 0.6W
Replace like for like. Never mix voltages, and never leave a holder empty.
Which bulb do I need?

G1 multicolour
Noma code 0344M
- Voltage6V
- Wattage0.75W
- BasePush-in
- Pack4 coloured bulbs + 1 fuse bulb
Choose this if: Your set has coloured glass bulbs. Includes a fuse bulb, so it’s the best card to start with.
View product
G1 clear
Noma code 0344C
- Voltage6V
- Wattage0.75W
- BasePush-in
- PackClear bulbs + 1 fuse bulb
Choose this if: Your set has clear glass bulbs. Includes a fuse bulb too.
View product
G1 fuse bulbs
Noma code 0344F
- Voltage5V
- Wattage0.6W
- BasePush-in
- Pack5 fuse bulbs
Choose this if: The whole set has gone out. Every set has one fuse bulb, which is designed to blow first.
View productHow to check your Victorian Lanterns bulb
- Check the label on the cable near the plug. It should show set number 4611 and lamp code G1. If it says a different lamp code, these aren’t the right bulbs. Call us and we’ll find the right ones.
- Unplug the set and pull out one working bulb. It should have a glass bulb sitting in a small plastic base, with two wires folded down the sides, like the photos above.
- Look at the glass. Coloured glass means you need G1 multicolour. Clear glass means G1 clear.
- Whole set gone out? Order G1 fuse bulbs too. The multicolour card includes one fuse bulb.
Noma Victorian Lanterns 4611 specification
| Set number | 4611 |
|---|---|
| Set name | Noma Victorian Lanterns |
| Lights | 40, with lantern-shaped shades |
| Bulbs | 39 × G1 6V 0.75W + 1 × G1 fuse bulb 5V 0.6W |
| Bulb base | G1 push-in |
| Bulb spacing | 15cm |
| Lit length | 5.85m |
| Lead to plug | 2.5m |
| Use | Indoor only |
| Replaced by | Noma Victorian Lantern 40 LED (2523081) |
Is yours the new LED version?
Noma’s newer Victorian Lantern 40 LED (2523081) looks similar but uses LEDs, and G1 bulbs won’t fit it. If the label near the plug shows 2523081 or mentions LED, give us a call. If your old 4611 has had its day, the 2523081 is its direct replacement, with an 8-hour timer built in.
My whole set has gone out
The bulbs are wired one after another, so one loose, missing or blown bulb can put the whole set out. Unplug it, push every bulb firmly into its holder, then replace the fuse bulb. If it still won’t light, swap the bulbs one at a time with a spare until it does.
Questions
The new bulb won’t push into my holder. What can I do?
Noma has changed the plastic base slightly over the years. Gently pull the glass bulb out of the new base and fit it into your old base instead.
Do the same bulbs fit my other Noma sets?
Often, yes. The Pickwick, Canterbury Belles, Victorian Lanterns and Classic Mini sets all use G1 bulbs. See the full list of G1 sets.
Other Noma spares guides
